Forestay extension – 1/8″ heavy duty with fork fitting at one end and threaded at the other
Spars and Standing Rigging
Forestay extension – 1/8″ heavy duty with fork fitting at one end and threaded at the other
$82.10
The Forestay Extension is the part that feeds through the bow plate and screws into the turnbuckle. Furthermore, it’s what the 1/8″ Forestay attaches too. Note: This is a thicker forestay extension that requires a heavy duty turnbuckle, see below. The forestay extension holds up the mast and can eventually wear out. At the beginning of every season you should always check your rig, especially the forestay extension.
Note: A loose rig rocking over time, even while the boat is on land is what causes forestay extensions to where out. A loose rig mast should be pulled forward by the jib halyard when not in use. This will prevent even the standard forestay extensions from wearing out.
SKU: 660039
Category: Spars and Standing Rigging
You may also like…
-
Hull, Blade & Deck Fittings
Jib tack wire – 3/32″ with fork fitting at one end and Wichard shackle at the other end
$88.25 Add to cart -
Hardware & Fasteners
Forestay Extension – 3/32″ with fork fitting at one end and threaded at other end
$68.30 Add to cart -
Spars and Standing Rigging
Forestay – 1/8″ heavy duty with fork fitting swaged at each end
$86.94 Add to cart -
Hardware & Fasteners
Forestay turnbuckle assembly for 1/8″ extension with safety wire
$32.75 Add to cart
Related products
-
Hardware & Fasteners
Shroud adjuster plate – single flat (original style with 4 holes on 7/8″ on centers)
$9.70 Add to cart -
Hardware & Fasteners
Forestay adjuster – Racelite multi-holed channel with 2 clevis pins
$10.20 Add to cart















